0
0 reviews

CPCCSF2003 - Cut and Bend Materials using Oxy-LPG Equipment

CPCCSF2003 – Cut and Bend Materials using Oxy-LPG Equipment provides essential training in thermal cutting operations. Learn how to safely ... Show more
Instructor
mattyonshift
38 Students enrolled
  • Description
  • FAQ
  • Notice
  • Reviews

CPCCSF2003 – Cut and Bend Materials using Oxy-LPG Equipment

This course equips learners with essential skills in safely operating Oxy-LPG equipment for cutting and bending steel and metal components. It covers all aspects of handling gas systems, conducting pre-operational checks, executing precision cuts, and following Australian Work Health and Safety (WHS) regulations.

What You Will Learn

  • Identify and set up Oxy-LPG cutting equipment
  • Safely ignite, adjust, and shut down gas flames
  • Perform straight-line and profile cutting techniques
  • Bend materials to specification using heating methods
  • Apply WHS practices and risk controls specific to gas cutting

Course Delivery & Certification

Delivery Mode: Online

Certification: Statement of Attainment after Upgrade

What does this course cover?
This course provides training in gas cutting and heating techniques using Oxy-LPG equipment. You'll learn setup, flame control, precision cutting, and safe shutdown procedures.
Who should take this course?
This course is ideal for metalworkers, steel fixers, construction workers, and apprentices looking to master Oxy-LPG thermal operations.
Do I need experience to enrol?
No prior experience is required. However, a White Card (CPCCWHS1001) is mandatory to work on-site.
What certification will I receive?
You’ll receive a Statement of Attainment after upgrading to the nationally recognised pathway.
How is this course delivered?
Fully online and self-paced. You’ll engage with interactive modules, safety videos, and practical guidance over 1 week.

Important Notice: Course Recognition & Subscription Access

At Onshift.edu.au, we offer both Nationally Recognised Training and Knowledge-Only Courses to support learners in achieving their educational and professional goals. Please read the following information carefully before enrolling:

Nationally Recognised Courses

  • Courses that display a course code and official title (e.g. – Apply WHS Requirements, Policies, and Procedures in the Construction Industry) are Nationally Recognised Training programs.
  • Upon successful completion, students receive a Statement of Attainment under the Australian Qualifications Framework (AQF).
  • These programs include both theoretical learning and practical performance evidence assessments, which are required for formal certification.

Knowledge-Only Courses (Subscription-Based)

  • All subscription-based courses contain the same theoretical content as the corresponding Nationally Recognised Training programs.
  • These courses are designed for knowledge-building purposes only and do not include practical assessments.
  • Learners who complete these courses do not receive a Statement of Attainment but can use the knowledge gained for personal or professional development.

Upgrading to a Nationally Recognised Qualification

  • Learners who complete a Knowledge-Only Course through a subscription may upgrade to a Nationally Recognised Course by:
  • Paying the enrolment fee for the accredited program.
  • Successfully completing the required practical performance assessments outlined in the course requirements.
  • Upon successful completion, learners will receive a Statement of Attainment for the relevant course.

Important Information

📌 Students studying an NRT course as a member of the site will only have access to the learning materials. They are not officially enrolled in the Unit of Competency (UoC) until they have upgraded and paid for the unit they wish to attain a Statement of Attainment (SoA) for.

For more details on enrolment, assessment requirements, and certification, visit Onshift.edu.au or contact our support team.

uri_ifs___M_d936adcb-b9ec-473f-817b-a15e6da31b1a.jpg
Share
Free course included in membership - upgrade to access assessments
Course details
Duration 12 hours
Level Beginner
Statement of Attainment after Upgrade
365 days
ALL
Basic info

Duration: Self-paced (Recommended: 1 week)

Mode of Study: Online

Certification: Statement of Attainment after Upgrade

Prerequisites: No formal prerequisites; however, a White Card (CPCCWHS1001) is required for work on construction sites.

Course requirements
  • Mandatory Prerequisite: White Card (CPCCWHS1001) is required for all workers in construction-related training.
  • Recommended: Minimum 2 years of experience in construction or metal fabrication.
  • Access to a computer with a stable internet connection for online learning.
  • Basic understanding of construction site safety, PPE use, and hazard identification.
Intended audience

Who Should Enrol?

This course is designed for:

  • Workers looking to gain formal recognition of their metalwork skills
  • Individuals entering the construction or fabrication industry
  • Tradespeople seeking upskilling in thermal cutting techniques
  • Those responsible for structural steel preparation and modification

Archive

Working hours

Monday 9:30 am - 6.00 pm
Tuesday 9:30 am - 6.00 pm
Wednesday 9:30 am - 6.00 pm
Thursday 9:30 am - 6.00 pm
Friday 9:30 am - 5.00 pm
Saturday Closed
Sunday Closed

Archive

Working hours

Monday 9:30 am - 6.00 pm
Tuesday 9:30 am - 6.00 pm
Wednesday 9:30 am - 6.00 pm
Thursday 9:30 am - 6.00 pm
Friday 9:30 am - 5.00 pm
Saturday Closed
Sunday Closed

Archive

Working hours

Monday 9:30 am - 6.00 pm
Tuesday 9:30 am - 6.00 pm
Wednesday 9:30 am - 6.00 pm
Thursday 9:30 am - 6.00 pm
Friday 9:30 am - 5.00 pm
Saturday Closed
Sunday Closed

Archive

Working hours

Monday 9:30 am - 6.00 pm
Tuesday 9:30 am - 6.00 pm
Wednesday 9:30 am - 6.00 pm
Thursday 9:30 am - 6.00 pm
Friday 9:30 am - 5.00 pm
Saturday Closed
Sunday Closed